PUBLICATIONS

Details of publications in Journals
Sl. No Title Author/ Co-Author Volume/Issue/Journals Year Impact factor
Academic year: 2019-2020
1 A CFD Analysis of Winglet Configuration to study its effects on Aircraft
Performance
Dharmendra A Ponnaswami Volume: 04 Issue: 04 ISSN: 2582-3930 April -2020  
2 Boundary Layer Control of Airfoil using Rotating
Cylinder
Dharmendra P ISSN: 2277-3878 (Online), Volume-8 Issue-6 March
2020.
 
3 Design Optimization of Aircraft Landing Gear’s Torsion Link Using Generative Design Rudresh M Journal for Science and Advance Research In Technology, ISSN:2395-1052, Volume-6 April -2020  
4 Aerodynamic Design Optimization of Blended Wing Body Aircraft Naresh D C International Journal of Science and Management ISSN: 2582-3930 Volume: 04 Issue :04 April- 2020  
5 Estimation and Comparison of Welding Responses Using
MRA, GMDH and ANN Technique of Al6061 and Al7075
Material in FSW
Prathik Jain S Proceedings of the ASME 2019
International Mechanical Engineering Congress and Exposition
IMECE2019
January-2020  
6 Estimation and Comparison of Electrode Wear and AE Parameters of Titanium and Stavax Materials in Wire Electric Discharge Machining using ANN Prathik Jain S International Journal of Studies in Indian Place Names ISSN:2394-3114, Vol-40-Issue-40 March-2020  
7 Design and Analysis of a Fixed Wing V- Tailed UAV Prathik Jain S International Journal of test engineering and management ISSN: 0193-4120, Volume 83 May-June 2020  
8 Electrode Wear and AE signals estimation and comparison
while machining P-20 tool steel material in WEDM using
GMDH and ANN techniques
Prathik Jain S International Conference on Recent Trends in Sciences, Engineering and
Management (ICRTSEM-2020) (Online)
23-24 May 2020  
9 Airfoil Design and Optimization for tailless aircrafts Naresh D C International Journal of Engineering Research and Application ISSN : 2248-9622, Vol. 10, Issue 4, ( Series -VI) pp. 21-30 April- 2020  
10 Computational Analysis of Blended Wing Body UAV Configuration with Flaps SURESH P International Research Journal of Engineering
and Technology,
Volume 7, Issue 5.
May 2020 7.529
11 Study of Flow optimization in Mixed Compression Inlet with Cowl Deflection SURESH P International Research Journal of Engineering
and Technology,
Volume 7, Issue 5
May 2020 7.529
12 Interpretation of Flow Visualization in Generic Combustor through
Design and Fabrication of a Traverse System
SURESH P Think India Journal, Volume-22, Issue-14- (ISSN-0971-1260) December 2019  
13 Aerodynamic Optimization of Wing by camber morphing using CFD Rudresh M IJEAT, VOLUME-9, ISSUE-5 May 2020  
14 Geometrical Design of a Rotor Blade for a Small Scale Horizontal Axis Wind Turbine Dr. A. Arokkiaswamy

Vol.8, Issue 3, International Journal of Recent Technology and Engineering,

ISSN: 2456-8880,
2019 3.98
15 Green Energy Conversion System Dr. R. Rajendran

International Journal of Hydrology Science & Technology,

Inderscience Publishers, UK, In Press.
2019 034
16 Technological Aspects of Microbial Fuel Cells and Soil Based Green Energy Conversion System Dr. R. Rajendran GMSARN International Journal,  AIT Bangkok, Thailand, In Press. 2019 0.113
17 Aerodynamic analysis and optimization of the futuristic Box-wing type Aircraft configuration Prathik S Jain/ Suresh P

Volume 6, Issue 6  JETIR

ISSN: 23495162
2019 5.87
18 Interpretation Of Flow Visualization In Generic Combustor Through Design And Fabrication Of A Traverse System Dr. R. Rajendran/ Prathik S Jain/ Suresh P Vol-22- Issue-14- Think India Journal 2019  
19 Optimization of the UAV Landing Gear to Minimize the Weight Anutha M A

Vol. 6 Issue 12, IJISET - International Journal of Innovative Science, Engineering & Technology

 ISSN (Online) 2348 – 7968
2019 6.248
20 Static Aero-Elastic Analysis of Wind Tunnel Test Model in Transonic Flow Dharmendra A. P INTERNATIONAL CONFERENCE ON ERCAM-2019, ISBN: 978-0-7354-1955-1, Volume number: 2204 2020  
21 STUDY OF A SUPERCRITICAL AIRFOIL USING CIRCULATION CONTROL WING Prathik S Jain, Suresh P, Aparna Ravi and Govind International Journal of Science, Technology, Engineering and Management–A VTU Publication 2020  
22 DESIGN AND ANALYSIS OF AN AIRCRAFT WING RIB FOR DIFFERENT CONFIGURATIONS Dharmendra P IInternational Research Journal of Engineering and Technology (IRJET) 2020  
23 Dihedral And Anhedral Convertible Wing Mechanism For Uav Chiranth K, Srinivas Reddy P, Vikas A, Abdul Tanzeel, Hareesha N G Journal of Emerging Technologies and Innovative Research 2020  
24 DESIGN AND OPTIMIZATION OF PINTLE INJECTOR FOR LIQUID ROCEKT ENGINE Dr. R Rajendran International Journal of Engineering Applied Sciences and Technology 2020  
25 Conceptual Studies on Aircraft Roll Using Jets of Air V Yamini AnooshaP , Shashankh SP , AmolP , Krishna Murthy  , M Adarsh IJISET - International Journal of Innovative Science, Engineering & Technology, Vol. 7 Issue 6, June 2020 2020  
26 Computational Analysis of Winglet-Rudder Configuration for Crosswind Landing V. Yamini Anoosha, Ruchi Saraf, Prakriti Bhowmick, Sowndarya, Supritha C L, International Journal of Engineering Research & Technology (IJERT) Vol. 9 Issue 05, May-2020 2020  
27 Computational Analysis and Optimization of Boxwing Aircraft for Reducing Induced Drag V.Yamini Anoosha, Kushal D Gowda, Saathvik Bhat, Manjunath Sagar, Vijay Jaya Vignesh International Journal of Innovative Technology and Exploring Engineering (IJITEE) , Volume-9 Issue-6, April 2020 2020  
28 Low-Cost Data Acquisition System with LabVIEW GUI for Real-Time Flight Data Transmission in UAVs Dr. Hareesha N G International Journal Of Engineering Research & Technology (IJERT) 2020  
29 Design, Development and Analysis Of Bladeless Thruster Anutha M A International Conferenceon Mechanical & Production Engineering (ICMPE), Bengaluru, WRICMPE-BGLR-190320- 5693 2020  
30 Development of Bladeless Thruster for an UAV Application Anutha M A International Journalof Emerging Technologies and Innovative Research (www.jetir.org), 2020  
31 Analytical evaluation of performance of a small scale horizontal axis wind turbine rotor blade R. Supreeth A. Arokkiaswamy, Kai Maitreya Hegde, Pavan Srinath, H. P. Prajwal, and M. Sudhanva AIP Conference Proceedings 2020  
32 Numerical investigation of the role of tubercles in augmenting the aerodynamic characteristics of S823 airfoil R. Supreeth A. Arokkiaswamy, Kai Maitreya Hegde, Pavan Srinath, H. P. Prajwal, and M. Sudhanva AIP Conference Proceedings 2020  
33 Experimental Investigation of Performance of a Small Scale Horizontal Axis Wind Turbine Rotor Blade R. Supreeth, A. Arokkiaswamy,  H. P. Prajwal International Journal of Renewable Energy Research 2020  
Academic year: 2018-2019
1 Preliminary Design of a Reverse Flow Annular Combustor and Experimental Investigations at Design and Off Design Operating Conditions A. Arokkiaswamy & Deepa M.S. Proceedings of International Journal of Recent Technology and Engineering (IJRTE) Second International Conference on ISSN: 2277-3878, Volume-X, Issue-X Emerging Trends In Science & Technologies For Engineering Systems (ICETSE-2019) S J C Institute of Technology, Chickballapur, Karnataka, India, 17th and 18th May 2019 Available in SSRN eLibrary of ELSEVIER Published By: Blue Eyes Intelligence Engineering & Sciences Publication. 2019 5.92
2 Shape Optimization of Blended-Wing-Body Configuration- An Experimental Approach A ArokkiaswamyNishanth P &Anthony Alen International Journal of Recent Technology and Engineering (IJRTE) Second International Conference on ISSN: 2277-3878, Volume-8, Issue-1C, May 2019 Emerging Trends In Science & Technologies For Engineering Systems (ICETSE-2019) S J C Institute of Technology, Chickballapur, Karnataka, India, 17th and 18th May 2019 Available in SSRN e Library of ELSEVIER Published By: Blue Eyes Intelligence Engineering & Sciences Publication. 2019 5.92
3 Estimation and Comparison of Electrode Wear and AE Parameters of Titanium material in Wire Electric Discharge Machining using ANN Prathik Jain S, H V Ravindra, G V Naveen Prakash and Ugrasen G Applied Mechanics and Materials (Accepted) 2019 3
4 Mechanical and thermal behavior of epoxy based halloysite nano clay/PMMA hybrid nanocomposites Rudresh M, Maruthi B. H., Channakeshavalu K, Nagaswarupa H. P SN Applied Sciences 2019  
5 Mechanical Assisted Modification of Halloysite Nano Clay: Characterization and Its Effect on Mechanical Properties of Halloysite-Epoxy Nano Composites Rudresh M, B. H. Maruthi, H. P. Nagaswarupa, B. S. Surendra, M. R. Anil Kumar and N. Raghavendra Asian Journal of Engineering and Applied Technology 2019  
Academic year: 2017-2018
1 Experimental and Numerical Investigation of Effusion Cooling Performance over combustor Liner Flat Plate R Rajendran Taylor & Francis Online Proceedings of the 23rd National Heat and Mass Transfer Conference and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference IHMTC2015 2018 1.216
2 Experimental Study of Adiabatic Cooling Effectiveness on an Effusion Cooled Test Plate with Machined Ring Geometries. R Rajendran Pages 865-880Volume 49, 2018 Issue 9, Heat Transfer Research DOI: 10.1615/HeatTransRes.2018021461 Begell House Digital Library 2018 0.8
3 Synthesis of Redundant Planar Isotropic Manipulator Using Link Length Ratios Hareesha N G Pages:73-78 Volume 8, Issue 1, International Journal of Engineering & Management Research. ISSN: 2250-0758 2018 4
4 Comparative assessment of drag & lift force on NACA66(2)-015 airfoil model by computational fluid dynamics and experimental method MayurAnvekar Pages:134-139 Volume 7,Issue 7, International journal of engineering research and Technology ISSN: 2278-0181 2018 0.47
5 Preliminary Design and Numerical Simulation of Reverse Flow Annular Combustor at Basic Design Point Operating Conditions A. Arokkiaswamy Iconic Research and Engineering Journals, Vol.2, Issue 4, ISSN: 2456-8880, Oct. 2018. 2018 3.59
6 Effect of PMMA on Microstructure and Mechanical Properties of Epoxy Polymer Blends Rudresh M, Maruthi B. H International Journal of Research in Advent Technology 2018  
7 Shock Boundary layer interaction and energetics in transonic flutter Pradeepa T K Pages:212-240, Volume 832, Journal of Fluid Mechanics 2017 2.82
Details of Publications in Conference
Academic year: 2018-2019
S. No Title Author/Co-Author Conference Year Impact factor
1 Estimation and Comparison of Welding Responses using Multiple Regression Analysis and Group Method Data Handling Technique of Al6061 and Al7075 Material in FSW Prathik Jain S All India Manufacturing Technology, Design and Research (AIMTDR-2018) 2018
2 Prediction of Machining Characteristic and Machining Performance while Machining P-20 tool steel Material in Wire Cut Electric Discharge Machine using Artificial Neural Network Prathik Jain S International Conference on Advanced Functional Materials for Energy, Environment and Health Care (AFMEEHC-19) 2019
3 Investigation of the effect of Swirler angle and reduction of CO2 emissions in Can Combustor for Gas Turbine Engines Prathik Jain S and Suresh P International Conference on Trends in Industrial & Value Engineering Business and Social Innovation (ICIVBS-19) 2019
Academic year: 2017-2018
S. No Title Author/Co-Author Conference Year Impact factor
1 Preliminary Design and Numerical Simulation of A Reverse Flow Annular Combustor At Basic Design Point Operating Condition Dr. A. Arokkiaswamy International Conference on Trends In Industrial and Value Engineering Business And Social Innovation (ICIVBS-18) 2018
2 Experimental Investigation of the effects of Protuberances on the Aerodynamic Performance of S823 Airfoil for Small Scale Wind Turbine Blades. Dr. A. Arokkiaswamy International Conference on Trends In Industrial and Value Engineering Business And Social Innovation (ICIVBS-18) 2018
3 A review on Blended wing Body Aircraft (Unconventional Configuration) for Commercial Application. Dr. A. Arokkiaswamy International Conference on Trends In Industrial and Value Engineering Business And Social Innovation (ICIVBS-18) 2018
4 Isotropic Manipulators as Energy Efficient Devices in Manufacturing Industry Hareesha N G National Conference on Green Energy, Environment & amp; Sustainable Development (NCGEESD 18) 2018
5 Computational Approach to Improve the Thrust at Various Truncated Section in Aerospike Nozzle Prathik Jain S/ Suresh P International Conference on Trends in Industrial & Value Engineering Business and Social Innovation (ICIV BS-18) 2018
6 Flow Field Study of Hypersonic Combustor Prathik Jain S/ Suresh P International Conference on Trends in Industrial & Value Engineering Business and Social Innovation (ICIV BS-18) 2018
7 Design & Analysis of Delta Wing and Flow Field Survey Using Five Hole Probe Prathik Jain S International Conference on Trends in Industrial & Value Engineering Business and Social Innovation (ICIVBS-18) 2018
9 Investigation of the effect of Swirler angle and reduction of CO2 emissions in Can Combustor for Gas Turbine Engines Prathik Jain S and Suresh P International Conference on Trends in Industrial & Value Engineering Business and Social Innovation (ICIVBS-19) 2019
Academic year: 2016-2017
S. No Title Author/Co-Author Conference Year Impact factor
1 Investigation of Stresses in Turbine Engine Disc  Rudresh M, Nitesh Karbari, Maruthi BH  International Journal of Advances in Scientific Research and Engineering  2017
2 Estimation and Comparison of Electrode wear and AE Parameters of P-20 tool steel Material in Wire Electric Discharge Machining using MRA and GMDH Technique Prathik Jain S International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 10-November 2017). 2017
3 Design and Analysis of a Press Tool for Retainer Used in Lower Door Hinge of Automobile Hareesha NG The International Conference on Current Trends in Engineering, Science and Technology 2017
4 Machining and Estimation of surface roughness and AE parameters of P20 Material in WEDM using ANN PrathikJain S All India Manufacturing Technology, Design and Research 2016
5 ISBN:978-93-86256-27-0
6 Estimation and Comparison of Surface Roughness and AE Parameters of P-20 tool steel Material in Wire Electric Discharge Machining using Multiple Regression Analysis and Group Method Data Handling Technique Prathik Jain S International Conference on Advance in Mechanical Engineering Science (ICAMES-2017) ISSN: 2456-1290 2016
7 Estimation and Comparison of Electrode Wear and AE Parameters in Machining of P-20 Tool Steel Material in Wire Electric Discharge Machining using MRA and GMDH Prathik Jain S International Conference on Precision, Meso, Micro and Nano Engineering ISBN: 978-93-80689-28 2017
8 Design And Development Of Energy Absorption Fixture For Safe Belly Landing On Land For A Typical Aircraft Configuration A Arokkiaswamy and Charles G Martin National Conference on Advances in Mechanical Engineering and Applied Sciences ISBN: 978-93-84935-77-1 2016
9 Review of Various Types of Controls Adopted for Fixed Wing Uninhibited Aerial Vehicle (UAV) A Arokkiaswamy National Conference on Advances in Mechanical Engineering and Applied Sciences- AMEAS-ISBN:978-93-84935-77-1 2016
10 Study of Surface Roughness and AE signals while Machining Titanium Grade 2 material using ANN in WEDM Prathik Jain S All India Manufacturing Technology, Design and Research. 2016
11 Silicon Polymer Thermal Protection Systems & Hot Structure for Hypersonic Vehicles Suresh P International Conference on Breakthrough in Engineering, Science & Technology. 2016
12 Finite Element Modal Analysis And Mesh Optimization Of A Typical Turbo Fan Engine – Fan Hub Frame A Arokkia swamy , Charles G Martin International Journal of Advanced Scientific Research and Management 2016
Details of Publications in Book Chapters
S. No Title of the Book Author/Co-Author Chapter/Chapter Title Year Imapct factor
1 Modern trends in Aerodynamic Systems and Mathematical Models, ISBN: 978-93-85682-13-1 A. Arokkiaswamy Book Chapter-07, Mixing Enhancement studies on 2:1 Plain Rectangular Jet and 1:1 Plain Circular Jet 2016
2 Modern trends in Aerodynamic Systems and Mathematical Models, ISBN: 978-93-85682-13-1 R. Rajendran Book Chapter-03, Design and Manufacturing of Centrifugal Compressor 2016
3 Modern trends in Aerodynamic Systems and Mathematical Models, ISBN: 978-93-85682-13-1 S. Srinivasan Book Chapter-09, Experimental Aerodynamic Investigation of Coupling Spinning Cylinder with Airfoil 2016
Share:
  • An Autonomous Institute Affiliated to VTU, Approved by AICTE & UGC

  • Accredited by NBA & NAAC with 'A' grade.

  • CET Code: E007 | Comed-K Code: E040

    PGCET - MBA: B158 | M.Tech: T822

Contact Info

  • Dayananda Sagar College of Engineering, Shavige Malleshwara Hills, Kumarswamy Layout, Bangalore - 78

  • 9741882324, 9741889394, 9741214448+91-80-42161750 / 1
  • This email address is being protected from spambots. You need JavaScript enabled to view it.

We use cookies to improve our website. By continuing to use this website, you are giving consent to cookies being used. More details…